How To Get Oil Out Of A Bowling Ball

Download Article

Download Article

A built upwards layer of oil on your brawl tin can cause it to react differently with the lane. This often causes your ball to lose grip on the lane, which can hurt your throw. Even so, yous can easily remove this oil with a trivial bit of time and some household products. Using these products, you can clean your ball at home, deep clean information technology at domicile, or you could accept it to a pro shop and have it cleaned with an oil extraction machine.

1. one

   Forbid the buildup of oil for easier cleaning. When the oil is fresh on your ball, it'll be easiest to wipe away. Wipe your ball after every game to maintain its status. Keep a brawl towel with your bowling gear for this purpose, and change it out after every time you play and so oil doesn't build up on the cloth and transfer again to the ball.

   • Your ball towel, ideally, should exist a lint costless, microfiber cloth. Microfiber cloths will protect the stop of your brawl, and lint free cloth will continue threads and pieces of cloth from rubbing onto your ball and influencing your game.
   • For the best results and the about consequent throws, towel off your ball after every shot. During prolonged play, you may desire to swap in a clean towel at nigh the halfway point in your play.^[one]

2. 2

   Moisten your rag with rubbing alcohol. ^[ii] Every bit soon as you finish bowling, the ball will be warm from the friction of the lane. This heat opens the pores on your ball, allowing y'all to make clean the brawl amend.^[3] A little bit of alcohol goes a long manner, so use it sparingly to wet your rag, then wipe downward the entire surface of your ball.

   • Later yous accept wiped down your ball with your alcohol dampened cloth, take a dry role of your towel or a fresh towel and wipe free any remaining wet on its surface.

   Advertisement

3. 3

   Make clean the ball regularly. The longer the oil sits on the surface of your ball, the more a chance it has to sink in and become harder to remove. This means that by cleaning your brawl every time you bowl, your ball will stay cleaner for longer.^[4]

   • This can salve you lot a considerable amount in professional cleaning and help you bowl more consistently.

Advertisement

1. ane

   Look until y'all've bowled a significant number of games. This kind of deep cleaning is known among bowlers and pros equally "pulling the oil out of the ball." Basically, this removes oil that has sunk deep into the pores of your ball over the grade of many games. The number of games y'all should wait earlier deep cleaning volition depend entirely on how frequently you lot play and the lanes y'all play on.

   • When playing on oily lanes regularly, y'all may desire to take the oil pulled from your ball every 50 games. Better regulated lanes might only require your brawl to be deep cleaned every 70 - 100 games.
   • When you start noticing the action of your ball on the lane to modify, it's probably fourth dimension for a deep cleaning.^[v]

2. 2

   Record upwards the finger holes on your bowling brawl. You'll desire to utilize a waterproof tape to practice this. Water that gets into the finger holes of your ball can impairment its performance. Apply the tape over the holes and smooth it then it is flat and there are no gaps in the tape.

   • To ensure that no water gets into your finger holes, you lot may want to use an boosted slice of tape per pigsty.

3. 3

   Fill a bucket with hot h2o and insert your ball. Oil is lighter than water, then it and any accompanying dirt will elevator from the surface of your ball when soaked in warm water. To allow the water enough time to work into the pores of your brawl, soak your brawl for 20 minutes.

4. four

   Remove your ball, take off its tape, and dry information technology. After your ball is finished soaking, it should be mostly clean. To prevent water on the surface of your ball from dripping into finger holes, go on the tape on the brawl and use a make clean, lint free towel or rag to dry the brawl. When the brawl is mostly dry out, remove the tape and dry out it once more to remove any remaining moisture.

Advertisement

1. 1

   Accept your ball to your local pro store. Even if you lot're a pro bowler, it's unlikely that you'll have a specialized ball cleaning car of your own. These machines are substantially tanks of water that heat to open up the pores of the ball and remove deeply entrenched oil. You should be able to find one of these machines at nearly bowling pro shops.^{[half dozen]}

2. ii

   Accept a pro shop employee clean your brawl. This service is ordinarily relatively inexpensive, and having a professional clean and shine your ball all merely ensures a thorough cleaning. Across that, your pro will exist able to point out harm that yous might otherwise not have noticed.^[7]

3. 3

   Programme for the expect fourth dimension until the brawl is make clean. The fourth dimension it takes your pro shop to clean your ball may vary, but yous can mostly expect brawl cleaning to take nearly an hour and a one-half. If you accept a spare ball, this is only enough time for yous to squeeze a few games in.^[8]

   • Alternatively, you could run errands, tackle some chores, read a volume, or play a handheld game while you're waiting. This mode, you're not bored while your ball is cleaned.

4. 4

   Basin similar a champion. At present that your ball is cleaned and polished, it should have regained the same lane reaction as it did originally. Continue to wipe your ball with a towel subsequently throws, and clean it afterwards every game to maintain its status.

Advertising

Add together New Question

• Question

  Can I use Dawn liquid lather?

  

  Yes, you lot can.

• Question

  How does non cleaning a bowling ball touch on its performance?

  

  If you basin with a hook, the oil buildup will affect the reaction of your brawl. For instance, if yous were previously balancing on the edge of the lane earlier your claw, an accumulation of oil can crusade y'all to not catch that terminal little flake of lane and fall into the gutter. Similarly, if yous aren't flirting with the edge of the lane, the oil buildup can crusade your ball to react later and with less intensity, causing you to miss the pocket.

• Question

  Can I use furniture shine on a bowling ball?

  

  Michael John Lust

  Community Answer

  I wouldn't practice that. The furniture polish would leave a slick residue on the ball, which would cause it to slide down the lane uncontrollably.

Come across more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

Video

• Exist patient while cleaning, especially when trying to remove marks on your brawl. These can sometimes take a good deal of elbow grease, and several applications of cleaner, earlier they are removed.

• Another style to clean a bowling ball would exist to place information technology in an electric smoker; the temperature of the smoker staying at approximately 135 degrees Celsius. Have the ball out every couple of hours; clean it with booze and a make clean rag. The process may accept five or 6 hours to piece of work, just works bully.

• While Windex can exist a good way of cleaning polyester or urethane bowling balls, it should never be used on whatever reactive resin balls, as it volition destroy the coverstock and reaction of the ball.

Thanks for submitting a tip for review!

Ad

• To prevent using whatever cleaning amanuensis that might do harm to your ball, you might want to check the US Bowling Congress's homepage, which has a list of approved cleaners and polishes.

• Avoid using Lustre King machines. These glaze the outer lining of a bowling ball, and might sometimes cause permanent damage.

• Information technology may exist necessary to habiliment a mask while using the rubbing booze. The fumes given off by your cleaner and its interaction with oil can be unhealthy for you, specially in poorly ventilated areas.

Advertising

Things You'll Demand

• Rubbing alcohol
• Clean rag (x2; microfiber/lint gratis preferred)
• Ball towel (microfiber/lint costless preferred)

• Saucepan (large enough to agree brawl)
• Tape (waterproof)
• Brawl towel (microfiber/lint costless preferred)

About This Article

Article Summary X

To clean a bowling ball, outset by dampening a rag with a fiddling rubbing booze and and so wiping down the ball with it. So, take a dry towel and wipe down the ball over again to dry it off. Attempt to practice this afterward each time you basin so that oil doesn't build up and make the ball harder to make clean. To deep clean the ball and remove oil build up, start past covering the finger holes on the ball with waterproof tape. Then, submerge the ball in a saucepan of hot water and let it soak for 20 minutes. Finally, remove the ball and dry it off with a clean towel. To learn how to clean a bowling brawl using an oil extraction machine, scroll downward!

Did this summary help you?

Thanks to all authors for creating a page that has been read 145,430 times.

Did this commodity assistance you?

Source: https://www.wikihow.com/Clean-a-Bowling-Ball

Share this post